FOLEY METAL FINISHING 
           -SINCE 1980-

Finishing Options

 

Powder Coating

Powder coating is an environmentally safe process for applying a durable, long lasting finish on metal without the use of harsh chemicals and fumes. Fine particles of pigment are electrostatically charged and sprayed onto electrically ground parts - then baked in a curing oven to produce a finished product that is smooth and long lasting. There are many types  of powder available, depending on the material being coated.

Different types of powder include:

Epoxy - Mainly applied for exterior usage where corrosion is a problem.

Polyester - Used for ultraviolet protection with a smooth, glossy finish and is also good for exterior use.

Hybrids - Low cost polyester/epoxy blends alternative.

TGIC - Outdoor, weatherproofing applications.

Acrylic - Produces a smooth, high-gloss finish.

Textures - Specialty products used to gve a texture finish.

Hammer-Tones - Specialty products used to give a hammer-tone finish.

Wrinkles - Used to give a wrinkle finish.

Translucent - A two coat process putting a tinted powder such as Candys or Transparents over a base coat of silver or chrome.

Fluorescent - A one or two coat powder, this is very bright yellow, orange or glow-in-the-dark.

Veined - A two-color powder in one.

Old World Finished - Makes new look old or weathered.

RAL Colors - The  most extensive color spectrum available in powder.

 
Media Blasting

Media Blasting is a dry abrasive blasting process which replaces chemical stripping by removing paint and other coatings from steel, sheet metal, aluminum/metals and fiberglass without warping or damaging the surface.  It leaves no chemical residue on the parts.

With Media Blasting, surfaces are stripped quickly, leaving parts clean and ready for recoating.


Spray Painting

Spray painting is the conventional process of applying wet finishes to metal, plastic or wood - to be air-dried or baked.

Types of paint inlude:  Zinc Rich Primers; Polyurethanes; Epoxies; Lacquers, Mil-Spec;
Coatings; Alkyds; Clear Coat

Finishes:  Flat, Semi-gloss; Gloss

Smooth or Texture

Custom color matches


Foley Metal Finishing
40 Pier Lane West
Fairfield, NJ 07004
973.575.8338
FAX 973.808.2687
bill@foleymetal.com

Web Hosting Companies